Friday, May 18, 2012

HOW TO make jars with decorative lids...so cool!














      Supplies
  • 1 glass jar with metal lid (Spaghetti sauce and pickle jars work great.)
  • 1 plastic bottle cap (The cap must be taller than the combined height of the cabinet knob shaft and the screw when it’s screwed in. Caps from soda bottles and some water bottles can work really.)
  • 1 cabinet knob (Vintage glass knobs can be found in fleas markets, antique stores, and thrift shops. If you keep an eye out for discarded cabinetry or furniture, you can remove the knobs, and be sure to have matching screws.)
  • 1 screw (If the cabinet knob doesn’t come with a screw, bring your knob to your local hardware store, so you can try some on for size. Flat screws are recommended, but short pointed wood screws can also work.)
  • 1 power drill
  • 1 set of drill bits (You’ll need a range of drill bits starting from 3/64” for the pilot hole to around 5/16” or the width of your cabinet knob shaft)
  • 1 screwdriver

How-To
  1. Sand the metal lid to remove the graphics. Do your sanding over some newspaper to catch the dust and make cleanup easy. I like to leave some paint on lid to give it a rustic, distressed look. For a sleeker look, sand it completely, and polish it off with steel wool.
  2. Drill a pilot hole through the center of the metal lid using your smallest drill bit. The smaller your drill bit the easier it’ll be to drill. You’ll risk tearing the lid if you start off start off with a large drill bit.
  3. Switch out the bit with gradually larger sizes and continue drilling until the hole is big enough to accommodate the shaft of the cabinet knob.
  4. Drill a hole through the center of the plastic bottle cap that’s large enough to accommodate the screw. If you’re using a pointed wood screw you won’t need to drill a hole, but it will make it easier to insert the screw later on.
  5. Now let’s put everything together. Insert the cabinet knob through the top of the metal lid.
  6. Insert the screw through the plastic bottle cap, using the screwdriver to screw it in all the way.
  7. Screw the plastic bottle cap and the knob together, using the screwdriver to ensure a tight fit.
  8. Put the metal lid back on the jar.
Voilà! You’ve successfully infused spaghetti and pickle jars with French-inspired vintage chic. Put it anywhere that could use a bit of shine and sparkle.

Useful tips
  • You can store little odds and ends in them.
  • Fill them with marbles or shells for a cool decorative accessory like Nate did on The Nate Berkus Show. Personally, I think they look great empty too!
  • I like keeping jars of snacks like nuts, chocolate, and potato chips neatly lined up on my kitchen counter, for easy access. When I have unexpected guests I can quickly pour snacks into little serving bowls. Sometimes I just put the jars on a serving tray and leave them on the coffee table for guests to help themselves.
Here is the link for more fun ideas, just copy and paste in your browser box....theres also a video of this DIY you can watch ;)
http://www.relevedesign.com/how-to-make-jars-with-decorative-lids-2/

No comments:

Post a Comment